Search
Products --> Compact Mode Series Filters
 


Compact Mode Series Filters

Water enters the filter through the inlet(1) and is pre-filtered through the coarse screen(3)
and then is filtered through the fine screen(4). From there it passes to the outlet(2). As dirt
accumulates on inner face of the fine screen,pressure differential builds up. At a preset level,
the rinse controller(12) opens flushing valve(9),creating a strong backflush stream through the
drainage(11) to the atmosphere.This backflush creates a suction at nozzles(6),cleaning the face
of the fine screen directly in front of the nozzle openings.

Backflush water now flows through collector pipe(7) via hydraulic rotor(8) to flushing valve,
causing the dirt collector assembly(7) to spin.Pressure drop in rotor assembly(5) and drainage
of piston(10) forces the collector assembly into axial movement.

The combined spin and axial movements ensure that the suction nozzles sweep the entire
screen area.

When flushing is completed,a second flushing cycle is automatically triggered,pushing the
collector assembly to its original position.The combined flush cycle takes 10-15 seconds.

Filter specifications table
NO.
Model
dia. D
(NB)
Flow
(m³/h)
Screen area (cm²)
Dimensions (mm)
Weight (kg)
flat
zig-zag
 
L
A
B 5
H
C 2
dia. E
(NB)
F
Empty
Full
1
WC04LP
4"
100
3065
9000
 
2025
3200
465
510
235
10"
300
90
170
2
WC04XLP
4"
100
4598
13500
 
2485
4060
875
510
235
10"
350
110
215
3
WC06LP
6"
180
3065
9000
 
2090
3265
480
570
270
12"
350
115
225
4
WC06XLP
6"
120
4598
13500
 
2485
4060
875
510
235
10"
350
120
230
5
WC08LP
8"
320
4598
13500
 
2685
4260
965
570
270
12"
460
140
320
6
WC10P
10"
400
4598
13500
 
2685
4260
965
585
285
12"
460
160
355


Screen available flat
:50,80, 100,120,150,200,200,400,800,1500,3000 micron.
zig-zag:15,25,30,40,50,80,100,120,150,200 micron.
Pressure losses for maximum flow capacity:0.2 bar.
Maximum working pressure:10 bar gauge.
Minimum upstream line pressure required during rinse cycle for all models:3 bar.
Maximum woking temperature:65
Approximate rinse cycle time:10-15 sec.
Backflush flow:30-35 m3/h
Standard of inlet/outlet flanges:ASA150,BSTD,BSTE,DIN 10,JIS K10,others.

Note:Pipes and valves marked with * are not supplied with the filter.
  Back
 
Tel:1-(438)938-6007 / 1-(416)802-6818 Fax:1-(450)433-9661
Emailinfo@clex1.com
Home | About us | Products | Applications | documentation | Contact us
Copyright © 2010-2014 clex1.com All Rights Reserved